Interfaces-Dmz/Wan3 - D-Link DRO-250i User Manual

Hide thumbs Also See for DRO-250i:

Table of Contents

Configuring DRO-250i

3.2.7

INTERFACES-DMZ/WAN3

Click on Interface > DMZ/WAN3 to get the web page as shown below:

DRO-250i users can use the same physical port as DMZ or Ethernet

WAN, called WAN3. User can check the option if he/she wants. After

checking the proper option i.e. DMZ or Ethernet WAN, checked physical

port will behave in that manner.

For example, if currently the port is working as DMZ port, and then user

can check the option of Ethernet WAN and then click on Apply. After

which the device and the port will start behaving as Ethernet WAN. It

works vice versa too.

DRO-250i User Manual

Table of Contents