Firewall- Policy - D-Link DRO-250i User Manual

Hide thumbs Also See for DRO-250i:

Table of Contents

Configuring DRO-250i

3.4.6.2

Firewall- POLICY

Click Advanced > Firewall > Policy to get the web page as shown below:

Policy (Firewall) Schedule

DRO-250i allows the user to configure three types of policies which are

Always, One-Time and one-week. "Always" Policy is used when user

wants the policy to be active all the time. If user wants to activate some

firewall policy, then enter a "one-time" policy with the required time and

that policy will be activated whenever that time comes. "One-week"

policy is also used for the same purpose. Please remember that if there is

any "Always" policy above the "One-time" or "One-week", then

"Always" policy will be active. So please keep "One-time" and "One-

week" policies on the top of the "Always" policies so that they can

become active when their time arrives.

User can disable any particular policy if it is required to activate any other

policy. For example, if there are two policies One-time and always, and

currently if "One-time" policy is active. If user wants to make "Always"

policy as active, then select the "One-time" policy and disable it.

DRO-250i User Manual

Table of Contents