Table of Contents
Advertisement
3.2.3
INTERFACES – WAN2
3.2.3.1
Mode Settings
Click on Interfaces > WAN2 > Mode Settings and the web page open as
shown below:
This page allows user to configure ISDN in either Leased or Dialup. If the
user selects Leased on this page and clicks apply then only leased
configuration page will be shown. If user wants to configure for dialup
then he/she has to select dialup from this page and then click apply.
Introduction to DRO-250i
DRO-250i User Manual
23
Advertisement
Table of Contents
