Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Related Manuals for D-Link DRO-250i
Summary of Contents for D-Link DRO-250i
- Page 1 DRO-250i ROUTER Review Package Contents Make sure that the package contains the following items. • DRO-250i Router • 3 Straight Ethernet cables • 1 Cross-over Ethernet Cable • 1Power cord • 1 V.35 Cable • 1 User Manual CD...
-
Page 2: Before You Begin
Before You Begin The default IP address for the DRO-250i is 192.168.100.254 with a Subnet Mask of 255.255.255.0. Connecting the DRO-250i A. Make the necessary power connections. The power LED will turn ON to indicate proper operation. B. Connect the LAN interface to the hub or switch connected to your internal network using cross cable. -
Page 3: Front View
Front View WAN3/DMZ Port V.35 LAN Port AUX Port ISDN Port Rear View Power Socket... - Page 4 DRO-250i Router Connection Diagram Internal Network DLM-G2100V DRO-250i V.35 Internet Hub or switch WAN 3 ISDN WAN 2 DNT-NT1 GLB-502T...
- Page 5 Configuring DRO-250i A computer on your LAN must have its NIC card set, to obtain its IP address automatically (refer appendix). The Router by default is assigned an IP address of 192.168.100.254 with a subnet mask of 255.255.255.0. 1. Connect to https://192.168.100.254...
- Page 6 2. Login page will appear User Name: admin Password: admin 3. D-Link welcome page will appear and you can browse through it.
- Page 7 4. For LAN settings go to Interface >LAN IP address :192.168.100.254 Subnet Mask :255.255.255.0 5. For WAN 1 settings go to Interface > WAN1 You will need to enter the IP address, subnet mask, gateway address provided to you by your ISP. WAN 1 Protocol :CiscoHDLC IP address : 192.168.0.1 Subnet mask :255.255.255.0...
- Page 8 6. For ISDN settings go to a) Interface>WAN2>Mode Settings Configure the ISDN Port for ‘Dial up’. Enable ‘Dial up’ Click ‘Apply’ b) Interface> WAN2> Dial-Up>Connection Settings Select the type of connection available at your end. e.g. My phone number: 2783393 Layer 2 Protocol: HDLC Layer 3 Protocol: Trans Packet Encapsulation: SynPPP...
- Page 9 C) Interface>WAN2>Dial-Up>Dial Out e.g. Channel Type: B1 Dynamic IP Address : Enable Area Code : 0 Dial Prefix: 0 Phone No.: 172225 User Name: test Password: test d) Interface> WAN2>Dial This page displays the status of the ISDN line. Click on ‘DIAL’ to connect to the ISP.
- Page 10 7. To add routes go to Routing This page allows the user to add and delete static route 8. To make DHCP settings go to Advanced >DHCP Server The Router can be configured to act as a DHCP server assigning IP’s to computers on the LAN network.
- Page 11 9. TOOLS >Admin This page allows the user to change the password It will ask for the old password and then the user has to type his/her new password 10. TOOLS > SYSTEM This page is used to save the Configuration to the flash file system so that user can get the configuration back after rebooting of the device.
- Page 12 11. TOOLS > UPLOAD This page allows you to upload new configuration files on the Router. User can configure the device and then, download the configuration in “cfg format” on Local PC, so that he/she can upload the configuration file (DRO250i.cfg) on the device again whenever required.
- Page 13 Appendix Assigning a Static IP address for your network adapter The examples below are using a Microsoft Windows 2000 OS. Note: Screens in other Operating Systems will look a bit different, but the steps are the same. 1. Right Click ‘My Network Places’ Right Click ‘local Area Connection’...
- Page 14 2. In the general tab of the Local Area Connection Properties menu, highlight Internet protocol (TCP/IP). Click on Properties 3. Configure the below page as follows Select obtain IP address automatically Click on OK...
-
Page 15: Password Recovery
Password Recovery: 1. In Case the user forgets the IP given to the LAN Port, it is possible to open the Device Manager Web Page by pressing the factory default switch and the settings will be restored back to default settings. Type https://192.168.100.254.