Table of Contents
Advertisement
automatically
-If user has configured channel B2 then when user selects connection type
64KDialin+64KDialout or 2 64Kdialin it will automatically be applied.
Automatic apply of mode settings: Suppose if user has selected leased
and press apply on the mode settings page then leased page will be applied
automatically if it was configured previously. Same, if user selects dialup
in
mode
settings
pages(connections page, dialout, dialin) will be automatically applied if
they were configured previously.
3.2.3.2.2 Dial Up-Dial out
Click on Interfaces > WAN2 > Dialup > Dial Out and the web page
open as shown below:
This page has the parameters required for establishing the internet
connection with the ISP. This page enables the user to configure the
channels with ISP configurations depending upon the connection type he
chooses from ISDN connection settings page. User can add a maximum of
be
page
and
press
Introduction to DRO-250i
apply then
ISDN
DRO-250i User Manual
27
applied
dialup
Advertisement
Table of Contents
