Setting The Time Format; Enabling Daylight Savings Time Adjustment; Setting The Date - Faraday MPC-6000 Programming Manual

Setting the Time Format

The time and the time format are adjustable.
Action
1. Press "More".
2. Press "More".
3. Press "More".
4. Press "Time/Date".
5. Press "Time".
6. Press "Set Time Format".
7. Use the "12 hour", "24 hour" buttons to set the
time format.

Enabling Daylight Savings Time Adjustment

The MPC-6000/MPC-7000/RND-2 can adjust for daylight savings automatically. Follow
the steps below to enable or disable the automatic daylight savings adjustment feature:
Action
1. Press "More".
2. Press "More".
3. Press "More".
4. Press "Time/Date".
5. Press "Time".
6. Press "DST Adjust".
7. Use the "Disable(Enable)" button to change the
status.

Setting the Date

The date and the date format are adjustable.
Action
1. Press "More".
2. Press "More".
3. Press "More".
4. Press "Time/Date".
5. Press "Date".
6. Press "Set Date".
7. Use the keypad to enter new date. Pressing "Clr"
will clear the entry. Pressing "Set" will set the date.
M P C - 6 0 0 0 / M P C - 7 0 0 0
Result
The display will show the current time format.
Result
The display will show whether the DST
automatic adjustment is enabled or disabled.
The state will toggle on the display.
Result
The display will show the current date.
21
/ R N D - 2 P R O G R A M M I N G M A N U A L