Changing The Maintenance Password; Setting The Time; Setting The Time Format; Enabling Daylight Savings Time Adjustment - Faraday MPC-6000 Programming Manual

Changing the Maintenance Password

The password for access to the Maintenance level menus may be changed as
follows from the Maintenance starting screen:
Press "More" three The display will
times, then press show request for
"Change Password". password change.

Setting the Time

The time and the time format are adjustable.
Press "More" three Press "Time".
times, then press
"Time/Date".

Setting the Time Format

The time and the time format are adjustable.
Press "More" three Press "Time".
times, then press
"Time/Date".

Enabling Daylight Savings Time Adjustment

The MPC 6000 and 7000 can adjust for daylight savings automatically. Follow the
steps below to enable or disable the automatic daylight savings adjustment feature:
Press "More" three Press "Time".
times, then press
"Time/Date".

Setting the Date

The date and the date format are adjustable.
Press "More" three Press "Date".
times, then press
"Time/Date".

Setting the Date Format

The date and the date format are adjustable.
Press "More" Press "Date".
three times, then
press "Time/Date".
M P C 6 0 0 0 / 7 0 0 0
Use the keypad to
change the
password and
press "Enter".
Press "Set Time". The display will
show the time
with the cursor
under the hours.
Press "Set Time The display will
Format". show the current
time format.
Press "DST The display will
Adjust". show whether the
DST automatic
adjustment is
enabled or
disabled.
Press "Set Date". The display will
show the current
date.
Press "Set Date The display will
Format". show the current
date format.
19
P R O G R A M M I N G M A N U A L
Use the keypad to
enter new time.
Pressing "Clr" will
clear the entry.
Pressing "Set" will
set the time.
Use the "12 hour",
"24 hour" buttons
to set the time
format.
Use the
"Enable/Disable"
button to change
the status. The
state will toggle
on the display.
Use the keypad to
enter new date.
Pressing "Clr" will
clear the entry.
Pressing "Set" will
set the date.
Use the two date
format buttons to
select the desired
date format.