Enabling/Disabling The Dact; Enabling/Disabling The Status Relays; Enabling/Disabling The Open Collector Circuits - Faraday MPC-6000 Programming Manual

Enabling/Disabling the DACT

The DACT (Digital Alarm Communication Transmitter) may be disabled/enabled as
follows:
Action
1. Press "Disable/Enable".
2. Press "Outputs".
3. Press "More".
4. Press "DACT".
5. Use the "Disable(Enable)" button to change the
state of the DACT.

Enabling/Disabling the Status Relays

The Status Relays may be disabled/enabled as follows:
Action
1. Press "Disable/Enable".
2. Press "Outputs".
3. Press "More".
4. Press "More".
5. Press "Status Relays".
6. Use the keypad to enter the address.
7. Use the "Disable(Enable)" button to change the
state of the Status Relays.

Enabling/Disabling the Open Collector Circuits

The Open Collector Circuits may be disabled/enabled as follows:
Action
1. Press "Disable/Enable".
2. Press "Outputs".
3. Press "More".
4. Press "More".
5. Press "OC Ckts".
6. Use the keypad to enter the address (01-04) and
press "Enter".
7. Use the "Disable(Enable)" button to change the
state of the OC Circuit.
M P C - 6 0 0 0 / M P C - 7 0 0 0
Result
The display will show the status of the DACT.
Status will toggle on the display.
Result
The display will show the state of the Status
Relays.
Status will toggle on the display.
Result
The display will show the state of the OC
Circuit.
Status will toggle on the display.
19
/ R N D - 2 P R O G R A M M I N G M A N U A L