Maintenance Level; Enabling/Disabling Devices; Enabling/Disabling Input Groups; Enabling/Disabling Applications - Faraday MPC-6000 Programming Manual

Maintenance Level

Following are the details of the Maintenance level functions.

Enabling/Disabling Devices

The disable / enable screens allow the operator to disable or enable devices and
components of the system. System Inputs, Outputs, etc., can be disabled / enabled.
NOTE: When a device is already enabled, the disable option is displayed.
Action
1. Press "Disable/Enable".
2. Press "Inputs".
3. Press "Devices".
4. Enter the address through the keypad.
5. Use the "Disable(Enable)" button to change the
state of the device.

Enabling/Disabling Input Groups

The input group may be disabled/enabled as follows:
Action
1. Press "Disable/Enable".
2. Press "Inputs".
3. Press "Groups".
4. Enter the address through the keypad.
5. Use the "Disable(Enable)" button to change the
state of the group.

Enabling/Disabling Applications

The applications in the FireSmart detector that prevent false activation often make it
difficult to test the detectors using canned smoke. This function allows the Applications
in the detectors to be turned off for testing. A trouble is posted as a reminder to reset
them later.
Action
1. Press "Disable/Enable".
2. Press "Appl".
3. Use the "Disable(Enable)" button to change the
status of the applications in the FireSmart detectors.
M P C - 6 0 0 0 / M P C - 7 0 0 0
Result
The display will show a screen for the address
of the device.
When the address is entered, the status of the
device will be displayed.
Status will toggle on the display.
Result
The display will show a screen for the address
of the group.
When the address is entered, the status of the
group will be displayed.
Status will toggle on the display.
Result
The display will show the current status of the
applications.
Status will toggle on the display.
17
/ R N D - 2 P R O G R A M M I N G M A N U A L