Enabling/Disabling Nacs; Enabling/Disabling City Tie; Enabling/Disabling The Dact; Enabling/Disabling The Status Relays - Faraday MPC-6000 Programming Manual

M P C 6 0 0 0 / 7 0 0 0

Enabling/Disabling NACs

The Notification Appliance Circuits may be disabled/enabled as follows:
Press Press "Outputs".
"Disable/Enable".

Enabling/Disabling City Tie

The City Tie Circuit may be disabled/enabled as follows:
Press Press "Outputs".
"Disable/Enable".

Enabling/Disabling the DACT

The DACT (Digital Alarm Communication Transmitter) may be disabled/enabled as
follows:
Press Press "Outputs".
"Disable/Enable".

Enabling/Disabling the Status Relays

The Status Relays may be disabled/enabled as follows:
Press Press "Outputs".
"Disable/Enable".
P R O G R A M M I N G M A N U A L
Press "NACs".
Press "More" and
then press "City
Tie".
Press "More" and
then press "DACT".
Press "More", press
"More" and then
press "Status
Relays".
Enter the number of
the NAC through
the keypad and
press "Enter". The
display will show
the current state of
the NAC.
The display will
show the status of
the City Tie.
The display will
show the status of
the DACT.
The display will
show the status of
the Status relays.
18
Use the
"Enable(Disable)"
button to change
the state of the
NAC. Status will
toggle on the
display.
Use the
"Enable(Disable)"
button to change
the state of the City
Tie. Status will
toggle on the
display.
Use the
"Enable(Disable)"
button to change
the state of the
DACT. The Status
will toggle on the
display.
Use the
"Enable(Disable)"
button to change
the state of the
Status Relays. The
status will toggle on
the display.