Analog way SmartMatriX User Manual page 72

8.3 Menu tree
INPUTS
[...]
72
CONFIG STATUS
AUTOSET ALL
SYNC. STATUS
INPUT 1: NO
INPUT 2: NO
INPUT 3: NO
INPUT 4: NO
HDMI®1: NO
HDMI®2: NO
SDI 1: NO
SDI 2: NO
SDI 3: NO
SDI 4: NO
INPUT 1
INPUT 2
INPUT 3
INPUT 4
HDMI®1
HDMI®2
SDI 1
SDI 2
SDI 3
SDI 4
INPUT STATUS
INPUT 1
ACTIVE PLUG:
(I1)
FRMT:
RATE:
(I2)
SYNC.POL.:
(I2)(I3)
HDCP
(I2)(I4)
AUTOSET
FREEZE
ACTIVE PLUG
ANALOG
(I1) Displayed when input is a multiplug input.
(I2) Displayed when a valid input signal is detected
(I3) Displayed when it is an analog plug and when
the signal is computer HV type
(I4) Displayed for HDMI®and DVI-D plugs
(I5) Displayed when the plug is analog, DVI-D or
HDMI
(I6) Displayed when the plug is analog
(I7) Displayed when the plug is analog and the
signal type is VIDEO RGBS
(I8) Displayed when the plug is not SDI