Chapter 1
Workflow
1.1
For Fujitsu Drivers
When the ETERNUS Multipath Driver or the GR
Setting the Multipaths
Install the multipath software and set up the mul-
tipath connections. Settings will depend on which
multipath software is being used.
"Chapter 9 Setting the Multipaths" (page 38)
•
•
"FUJITSU Storage ETERNUS DX Configuration
Guide -Server Connection- (Fibre Channel) for
Oracle Solaris Multipath Driver Settings"
•
Installing and setting up the Multipath Driver
Multipath Driver product manual
-
Checking the corresponding Multipath Driver
•
"Server Support Matrix"
-
Creating the Volumes
Create slices, exactly the same as for a regular disk.
Creating a File System
Create a file system, exactly the same as for a regular disk.
"Chapter 10 Setting a File System" (page 39)
•
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Multipath Driver is used
9
Copyright 2015 FUJITSU LIMITED
When VxVM is used
Setting Up VxVM
Install and set up VxVM when VxVM is used.
•
"3.5 VxVM Notes" (page 28)
"Chapter 9 Setting the Multipaths" (page 38)
•
Installing and setting up the VERITAS Volume
•
Manager
-
VxVM product documentation
Checking the supported version and use envi-
•
ronment
"Server Support Matrix"
-
P3AM-3702-16ENZ0