Svm; Clusterware; Fibre Channel Cards That Require An Oracle-Brand Driver - Fujitsu ETERNUS DX Configuration Manual

Chapter 2 Checking the Server Environment
2.7

SVM

2.7 SVM
When using SVM, check the "Server Support Matrix" for SVM usage conditions.
2.8

Clusterware

When using clusterware (such as VERITAS Cluster Server, Oracle Solaris Cluster, Oracle RAC), check the "Server
Support Matrix" for the usage conditions.
2.9

Fibre Channel Cards that Require an Oracle-brand Driver

Irrespective of their actual origin, the Fibre Channel cards listed in the following table require the use of an
Oracle-brand Fibre Channel card driver.
Similarly, install and set up these Fibre Channel cards according to the procedures in the "Driver Settings for
Non-Fujitsu Fibre Channel Cards" section in the "FUJITSU Storage ETERNUS DX Configuration Guide -Server
Connection- (Fibre Channel) for Oracle Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards".
Supplier
Fujitsu
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Fibre Channel card product ID
• SP1X7FAB2F
SP1X7FBA2F
•
• SP1X5FBA2F
SP1X7FAA2F
•
• SP1X5FAA2F
SP1X7FAR2F
•
• SP1X7FAS2F
SP1X7FBR2F
•
SP1X7FBS2F
•
SE0X7F32F
•
SE0X7F31F
•
SE0X7F22F
•
SE0X7F21F
•
XSEFC402AF
•
XSEFC402A
•
XSEFC401AF
•
XSEFC401A
•
XSPFC212A
•
XSPFC211A
•
XSPFC202A
•
XSPFC201A
•
X6799A
•
X6768A
•
• X6767A
X6727A
•
24
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0