Fujitsu ETERNUS DX Configuration Manual page 22

Chapter 1 Workflow
1.5 For Brocade Drivers
Labeling LUN
Format the ETERNUS DX storage systems' logical units using the "format" utility.
Setting the Multipaths
Install and set up the Multipath Driver.
"Chapter 9 Setting the Multipaths" (page 38)
•
Installing and setting up the Multipath Driver
•
"FUJITSU Storage ETERNUS DX Configuration
-
Guide -Server Connection- (Fibre Channel) for
Oracle Solaris Multipath Driver Settings"
Checking the corresponding Multipath Driver
•
"Server Support Matrix"
-
Creating the Volumes
Create slices, exactly the same as for a regular disk.
Creating a File System
Create a file system, exactly the same as for a regular disk.
"Chapter 10 Setting a File System" (page 39)
•
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
When MPxIO is used
22
Copyright 2015 FUJITSU LIMITED
When MPxIO is not used
P3AM-3702-16ENZ0