Fujitsu ETERNUS DX Configuration Manual page 21

Chapter 1 Workflow
1.5 For Brocade Drivers
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
"Chapter 6 Setting Up the Fibre Channel Switches" (page 34)
•
Setting up the Fibre Channel switches
•
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre
-
Channel Switch Settings"
Checking the Fibre Channel switch connection requirements
•
"Server Support Matrix for FC-SWITCH"
-
Installing the Driver
Install the appropriate driver for the Fibre Channel card being used.
"Chapter 7 Installing Drivers and Setting Up the Server" (page 36)
•
Installing Fibre Channel cards and drivers
•
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle
-
Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards"
Checking the Fibre Channel card driver versions
•
- "Server Support Matrix"
Setting Up the Server
Edit the setup file to set the parameters required for connection.
• "Chapter 7 Installing Drivers and Setting Up the Server" (page 36)
Setting up the server
•
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle
-
Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards"
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX.
"Chapter 8 Setting Up the Server to Recognize the Logical Units" (page 37)
•
• Have the server recognize the ETERNUS DX LUNs.
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle
-
Solaris Driver Settings for Non-Fujitsu Fibre Channel Cards"
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
21
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0