Fujitsu ETERNUS DX Configuration Manual page 12

Chapter 1 Workflow
1.2 For Oracle Drivers
Labeling LUN
Format the ETERNUS DX storage systems' logical units using the "format" utility.
When the ETERNUS MPD3.1 or later, MPxIO, or
Setting the Multipaths
Install and set up the multipath driver or VxVM.
Settings will depend on what multipath software
is being used.
"Chapter 9 Setting the Multipaths" (page 38)
•
Installing and setting up the Multipath Driver
•
"FUJITSU Storage ETERNUS DX Configuration
-
Guide -Server Connection- (Fibre Channel) for
Oracle Solaris Multipath Driver Settings"
Checking the corresponding Multipath Driver
•
- "Server Support Matrix"
Creating the Volumes
Create slices, exactly the same as for a regular disk.
When using VxVM or SVM, refer to the individual product documentation to create volumes.
Creating a File System
Create a file system, exactly the same as for a regular disk.
"Chapter 10 Setting a File System" (page 39)
•
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
VxVM is used
12
Copyright 2015 FUJITSU LIMITED
When the ETERNUS MPD3.1 or later, MPxIO, or
VxVM is not used
P3AM-3702-16ENZ0