Fujitsu ETERNUS DX Configuration Manual page 7

Chapter 1 Workflow
1.1 For Fujitsu Drivers
Workflow
Installing ETERNUSmgr and Setting Up the ETERNUS DX
If ETERNUSmgr is to be used, install it and set up the ETERNUS DX.
"Chapter 4 Installing and Setting Up ETERNUSmgr" (page 32)
•
• "Chapter 5 Setting Up the ETERNUS DX" (page 33)
Checking the setup and maintenance operations
•
"ETERNUS Web GUI User's Guide"
-
"ETERNUSmgr Install Guide"
-
"ETERNUSmgr User Guide"
-
• Setting up the ETERNUS DX
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Disk Storage System Set-
-
tings" that corresponds to the ETERNUS DX to be connected
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
"Chapter 6 Setting Up the Fibre Channel Switches" (page 34)
•
Setting up the Fibre Channel switches
•
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre
-
Channel Switch Settings"
• Checking the Fibre Channel switch connection requirements
"Server Support Matrix for FC-SWITCH"
-
Installing the Driver
Install the appropriate driver for the Fibre Channel card being used.
"Chapter 7 Installing Drivers and Setting Up the Server" (page 36)
•
Installing Fibre Channel cards and drivers
•
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle
-
Solaris Driver Settings for Fujitsu Fibre Channel Cards"
Checking the Fibre Channel card driver versions
•
"Server Support Matrix"
-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
7
Copyright 2015 FUJITSU LIMITED
P3AM-3702-16ENZ0