Toolkit; Led Management - Xtore NASolution NP1040 User Manual

NFP Storage Manager 1.1 User's Manual

Toolkit

LED Management

System administrator can control the LED indicators from here.
The ID indicator is located on the front panel of your NP1040 NAS
server. In the event of an emergency, system administrator needs only
to click the Turn on ID button on this page to turn on the ID indicator.
Once the light is on, system administrator can easily distinguish the
problematic server in the group and quickly resolve the problem(s).
Once the problem(s) has/have been resolved, make sure to click the
Turn off ID button.
There is another emergency LED light on the front panel of NP1040
server. When an error occurs in the memory, system fan, HDD, or the
system temperature, this light will be turned on. This emergency light
will only be turned off once the problem has been resolved and the
server has been restarted. However, in the event that the system
temperature is too high and later returns to normal, the over-heating
warning indicator will not automatically be turned off. System
administrator must manually click the Event Reset button on this page
85
Chapter 4. Using NFP Storage Manager 1.1