Table of Contents
Advertisement
NFP Storage Manager 1.1 User's Manual
Problems about Windows Clients' Access to the
NP1040 NAS Server
Cannot find NP1040 server in "Network Neighborhood"
Make sure that NP1040 server has been turned on and
1.
connected to the LAN.
Make sure system administrator has enabled Windows
2.
Networking on NP1040 NAS server.
Make sure the Windows client has correctly installed a TCP/IP
3.
server.
Enter "My Computer" or "Windows Explorer" and input
4.
"\\Server_Name" in the field of http address.
5.
Start "FindàComputer" on the Start Menu, input the name of
your NP1040 server and search for it.
6.
Click on "ToolsàMap Network Drive" in "My Computer" or
"Windows Explorer".
field of "Path." Press OK to open and connect with the public1
folder on the server.
Cannot access the file(s) in a certain shared folder on
NP1040 server via Windows clients
1.
Check if there is such a shared folder on NP1040 NAS server.
In some cases, a shared folder on the NAS server deleted by
system
administrator
132
Enter "\\ Server_Name\public1" in the
may
still
be
shown
in
"Network
Troubleshooting
Advertisement
Table of Contents
