Setup - Xtore NASolution NP1040 User Manual

Connect NP1040 server to LAN. Turn on the server.
2.
Make sure the client terminal used to configure NP1040 server
3.
is installed with Microsoft Internet Explorer 5.5 or higher, and
make sure this computer and NP1040 server can be connected
through physical network medium (e.g. hub, switch, etc.).
4. Set the resolution of the client terminal screen to 800*600 or
higher.

Setup

Choose a computer with a network connection running
1.
Microsoft Windows 98/ ME/NT/ 2000 and a browser version
above IE5.5 installed.
Insert the NASolution NFP Utility CD into your CD-ROM drive.
2.
In most systems, NFP Setup Assistant starts automatically. If it
doesn't start, please run "SFAssistant.exe" program manually.
3. NFP Setup Assistant will automatically locate and list all
NP1040 servers running Network Filer Plus on the LAN.
Server Status column will show current status of the server.
When the message System is ready is shown in this column,
you may begin your setup.
Double-click on the server name NAS001 to open the network
4.
configuration screen.
5. If your LAN includes a DHCP server, select Get Network
Configuration through DHCP to automatically configure the
network through the DHCP server. If no DHCP server is present,
or if you prefer manual configuration, choose Use Manual
Configuration and enter an IP address, domain name, subnet
mask, gateway, and DNS server. The setup program will grab
the network configuration of the client for administrator's
reference. If this information is not enough, choose Suggestion
option; the setup program will check available IP's on the LAN
and provide a suggested IP address.
Chapter 2. Setting Up NP1040 NAS Server
NFP Storage Manager 1.1 User's Manual
Continued
The
11