Table of Contents
Advertisement
Chapter 7
Troubleshooting
NP1040 NAS Server Installation Problems
First-time Network Setup with NFP Setup Assistant fails
Make sure you have selected the correct server.
1.
2.
Make sure the server is connected to the LAN.
LED on the server panel to see if the connection is normal.
Make sure the server is connected to a power source and is on.
3.
4.
Make sure the LAN still has free IP addresses.
5.
Make sure the manually entered network settings are correct.
Make sure the client terminal you are using has correctly
6.
installed/set up the TCP/IP protocols, and is running Microsoft
Internet Explorer 5.5 or higher.
7.
Make sure NP1040 NAS server a nd the client computer that
runs NFP Setup Assistant can be connected through physical
network medium (e.g. hub, switch, etc.).
NFP Setup Assistant 1.0 cannot search for and setup
8.
NASolution Network Filer Plus 1.1. Please make sure you
are using NFP Setup Assistant 1.1.
Troubleshooting
NFP Storage Manager 1.1 User's Manual
Check the LAN
Advertisement
Table of Contents
