Table of Contents
Advertisement
n
Network
connection
connection and try again.
n
SMTP server unavailable. Confirm that the server is
working properly.
n
SMTP server rejected the message. Verify that the
SMTP server does not filter out junk messages.
Contact the system administrator or try using a
different SMTP server.
3.
Mail server connection failed.
This message indicates that the SMTP server has timed out and
not responded within 30 seconds. Verify that the SMTP server is
working properly.
Send email error: xxx.
4.
This message indicates an unknown mail error. Note the error
code and contact the system manufacturer's representative.
5.
Cannot create socket resource.
This message indicates that the system has insufficient
resources to execute the mail send operation. Reboot the server
to correct the problem.
Problems about Backing up/Restoring Da t a
Cannot back up/restore the data on NP1040 NAS
server
When the system fails to backup/restore data on NP1040 NAS server,
system administrator will receive an e-mail with an error code notifying
the data backup/restore failure. The administrator can also go to
system log tab of NFP Storage Manager and search for the error
code in the log file. Below follows an explanation of the e -mail error
Troubleshooting
NFP Storage Manager 1.1 User's Manual
broken.
Check
the
network
143
Advertisement
Table of Contents
