Problems About Apple Clients' Access To Np1040 - Xtore NASolution NP1040 User Manual

and save it as "net$log.dat".
map p:=\\NAS001_nw\public1
write login_name
if login_name<>"SUPERVISOR" and
login_name<>"SUPERVIS" and login_name<>"GUEST" then
map h:=\\NAS001_nw\home
end
As shown in the example, the login script will map the public1
folder on NAS001 as "p" drive and map users' home folders on
NAS001 as "h" drive for all Novell clients on the LAN.
3. Save the "net$log.dat" file to the \SYS\PUBLIC folder on
NP1040 NAS server.

Problems about Apple Clients' Access to NP1040

NAS Server
Cannot find NP1040 NAS server via Chooser or Network
Browser.
1. Make sure NP1040 NAS server has been turned on and
connected to the LAN.
Check if the Apple client is able to connect with other AppleTalk
2.
servers. If not, the network settings of this Apple client are
incorrect.
Make sure system administrator has enabled Apple networking
3.
connections over AppleTalk or TCP/IP protocol.
Troubleshooting
NFP Storage Manager 1.1 User's Manual
137