Table of Contents
Advertisement
The domain name field does not accept the following characters. If
you are using a DHCP server, do not use these characters on the
DHCP server either:
(, ), <, >, @, \, [, ], , , ;, :, ", space, enter (/n) and control characters.
LAN Port
Next, please setup the IP address of the first network port.
page will show the setup information previously defined in NFP Setup
Assistant, and system administrator can make additional changes
here.
If your LAN includes a DHCP server, click Get network configuration
through DHCP. Otherwise, choose Use manual configuration. Filling
out the column with a "red star sign" on the right is mandatory, while
filling out the column with the "orange star" is recommend by the
system.
Your NP1040 NAS server supports two network ports. You must go to
Server ConfigurationàBasic Configuration after completion of Quick
Configuration to continue setup of other network port.
Chapter 3. Quick Configuration
NFP Storage Manager 1.1 User's Manual
TIP
This
19
Advertisement
Table of Contents
