Shoe Hardware; Long-Term Storage - Wacker Neuson BS 50-4 Operator's Manual

BS 50-4
6.5

Shoe Hardware

See Graphic: wc_gr000048
6.6

Long-Term Storage

6.6.1
6.6.2
6.6.3
6.6.4
6.6.5
wc_tx000309gb.fm
On new machines, or after replacing shoe, check and tighten shoe
hardware (a) after the first 5 hours of operation. Inspect hardware
every week thereafter.
Torque hardware as specified.
8 6 N m
( 6 3 f t . l b s . )
a
Drain fuel from tank.
Start engine and run until remaining fuel is used.
Remove spark plug. Pour approximately 30 ml (1 oz.) of clean SAE
10W30 engine oil into cylinder through spark plug opening.
Pull starter rope slowly to distribute oil in engine.
Re-install spark plug.
w c _ g r 0 0 0 0 4 8
33
Maintenance