[D-6] Final Check - Yamaha 2007 FZ6-NA Service Manual

8. If the above-mentioned check are within specification, replace the ECU.
EAS4S81028

[D-6] FINAL CHECK

Checking procedures
1. Check the brake fluid level in the brake master cylinder reservoir and brake fluid reservoir.
Refer to "CHECKING THE BRAKE FLUID LEVEL" on page 3-24.
2. Check the wheel sensor housings and wheel sensors for proper installation.
Refer to "INSTALLING THE FRONT WHEEL" on page 4-14 and "INSTALLING THE REAR
WHEEL" on page 4-22.
3. Perform hydraulic unit operation test 1 or 2.
Refer to "HYDRAULIC UNIT OPERATION TEST" on page 4-56.
4. Delete the malfunction codes.
Refer to "[D-6-4] DELETING THE MALFUNCTION CODE" on page 8-101.
5. Perform a trial run.
Refer to "[D-6-5] TRIAL RUN" on page 4-59.
ABS (ANTI-LOCK BRAKE SYSTEM)
8-104