Yamaha 2007 FZ6-NA Service Manual page 16

Coolant temperature mode (FZ6-NHG(W)/FZ6-
NAHG/FZ6-SHG(W)/FZ6-SAHG)
1. Coolant temperature display
The coolant temperature display indicates the
temperature of the coolant.
Push the "RESET" button to switch the coolant
temperature display to the air intake tempera-
ture display.
NOTE:
When the coolant temperature display is
selected, "C" is displayed for one second, and
then the coolant temperature is displayed.
ECA4S81009
CAUTION:
Do not operate the engine if it is over-
heated.
Air intake temperature mode
A. FZ6-N/FZ6-NA/FZ6-S/FZ6-SA
B. FZ6-NHG(W)/FZ6-NAHG/FZ6-SHG(W)/
FZ6-SAHG
1. Air intake temperature display
The air intake temperature display indicates
the temperature of the air drawn into the air fil-
ter case. Push the "RESET" button to switch
the coolant temperature display to the air
intake temperature display.
NOTE:
• Even if the air intake temperature is set to be
displayed, the coolant temperature warning
light comes on when the engine overheats.
• When the key is turned to "ON", the coolant
temperature is automatically displayed, even
if the air intake temperature was displayed
prior to turning the key to "OFF".
• When the air intake temperature display is
selected, "A" is displayed for one second,
and then the air intake temperature is dis-
played. (FZ6-NHG(W)/FZ6-NAHG/FZ6-
SHG(W)/FZ6-SAHG)
Self-diagnosis device
A. FZ6-N/FZ6-NA/FZ6-S/FZ6-SA
B. FZ6-NHG(W)/FZ6-NAHG/FZ6-SHG(W)/
FZ6-SAHG
1. Error code display
This model is equipped with a self-diagnosis
device for various electrical circuits.
If any of those circuits are defective, the engine
trouble warning light will come on, and then the
display will indicate a two-digit error code (e.g.,
11, 12, 13).
This model is also equipped with a self-diagno-
sis device for the immobilizer system.
1-7
FEATURES