Yamaha 2007 FZ6-NA Service Manual page 67

Item
Hydraulic unit bracket 1 and stay
bolt (with ABS)
Rear wheel sensor rotor bolt (with
ABS)
Stay and frame bolt
Hydraulic unit and brake hose
union bolt (with ABS)
NOTE:
• Lower ring nut
1. First, tighten the ring nut to approximately 52 Nm (5.2 m·kg, 38 ft·lb) with a torque wrench, then
loosen the ring nut completely.
2. Retighten the lower ring nut to specification.
• Engine mount bolts and engine mount self locking nut
Refer to "INSTALLING THE ENGINE" on page 5-6.
Thread
Q'ty
size
M6 2 10 Nm (1.0 m·kg, 7.2 ft·lb)
M5 5
M6 4 10 Nm (1.0 m·kg, 7.2 ft·lb)
M10 4
2-22
TIGHTENING TORQUES
Tightening torque
6 Nm (0.6 m·kg, 4.3 ft·lb)
30 Nm (3.0 m·kg, 22 ft·lb)
Remarks
LT