Yamaha 2007 FZ6-NA Service Manual page 397

4. Check the entire signaling sys-
tem's wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK↓
This circuit is OK.
The oil level warning light fails to come.
1. Check the oil level warning light
bulb and socket.
Refer to "CHECKING THE LEDS"
on page 8-113.
OK↓
2. Check the oil level switch.
Refer to "CHECKING THE
SWITCHES" on page 8-109.
OK↓
3. Check the entire signaling sys-
tem's wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK↓
This circuit is OK.
The fuel level warning light fails to come.
1. Check the fuel level warning light
bulb and socket.
Refer to "CHECKING THE LEDS"
on page 8-113.
OK↓
2. Check the fuel sender.
Refer to "CHECKING THE FUEL
SENDER" on page 8-126.
OK↓
SIGNALING SYSTEM
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the oil level warning light
bulb, socket or both.
NG→
Replace the oil level switch.
NG→
Properly connect or repair the signal-
ing system's wiring.
NG→
Replace the fuel level warning light
bulb, socket or both.
NG→
Replace the fuel pump assembly.
8-24