Assembly; Stand - Leica MS5 User Manual

Assentbly
22
The components
1 a Incident-light base with
ste~ge
plate
1 b Tra nsmitted-light base with glass stage ple~te
2a Side-faced column with drive hous ing, coarse/fine
2b Side-faced column with drive hous ing, 300 mm or 500 mm
3 Microscope carrier
4 Optics ca rrier
5 Interch angeable objective
6 Binocula r tube
7
8
Wide-fie ld eyepiece for spectacle wearers, with eyecups
Various ErgoM odule™ or accessories for video, photography,
drawing, fluorescence, coaxial incident light etc.
Le 1ca M
Stereomicroscopes- Assembly
Side-faced column-+
incident-1 ight base
Side-faced column
-+
transmitted-light base
Stand
Incident-light stand
~
Remove the stage plate.
~ Insert 3 Al ien screws into the underside
of th e baseplate and secure them to the
bottom end of the side-faced co lumn.
~Insert the stage plate.
To fit the microscope carrier and the stereomicroscope,
see page 34
Transmitted-light stand
~
Pull the power cable out of the socket in the stand.
~ Remove the glass stage plate.
~ Carefully invert the transmitted-
light base and remove 7 Alien
screws from the base.
~ Lift off the lower part of the base.
~ Reve rse the upper part of the base .
~ Insert 3 Alien sc rews into the cover
plate from beneath and secu re
them to the bottom end of the si de-
faced column .
~Replace and secure the base.
~ Insert the glass stage plate.
~Fi t the microscope carrier and the
stereomicroscope as described
on page 34.
Le ica M Stereomic rosco pes - Assembly 23