Fiber-Optic Light Guide; Led Illumination; Supply (Line) Lamp 25W; Coaxial Illuminator - Leica MS5 User Manual

46
Fiber-optic
light guide
Cold light source Leica CLS series
The Leica CLS se ries is a high-performance line for h gh light
intensity with in the smallest possible space and flicke r-free
wh ite light with the lowest possible thermal effect on the ob-
jects. The comprehe nsive line of accessories enables unlimited
use. The CLS series is produce d of antistatic material.
Whe n using the ring la mp
(0
76 mm) on the planachromatic
objective 0.8x
~ 0
80 mm), a spec ial adapte r (10 447 078) is
required.
For a deta il ed information, refer to the user manual Lei ca CLS.
o
The clamp of the fib er-optic light guide cannot be
attached to the microscope carrie r AX. r;--, .
fS;;:
~Turn
the clamp in g screw out ofthe clamp.
~r
~
Hold the clamp in the opening of the
microscope carrie r.
~ Push the clamping sc rew through the
holes in the microscope carrier an d in
the broader part ofthe cla mp, and screw
it finger-tight to the narrow part of the
clamp.
'·{
0~ · ~
~· ' \ ~ \\
u~ ~ \~
Il l ~
~Inse rt the fiber-optic light guide into the clamp.
~Switch on the power unit.
~A l ign the light spot with the object.
~ Retighten the clamping screw.
Leica LED illumination
The Lei ca LED1000 (Lase r Em itting Diode) illu mination is ava il-
able with ring illuminator and/or spot and su itable for ro utine
tasks with the Leica MS5, MZ6, MZ7~, MZ9s stereomicroscopes.
LEDs, which do not develop any heat, are used as illuminators.
The calor tempe rature measures 5000 K (daylight).
For details see the separate instructions for use for the LED
ill umination.
Leica M Stereomicroscopes - llluminatio ns
rn
Supply (line) lamp 25W
Foll ow the safety instructions given on
page 7.
~
Fit the lamp holder and lamp as
desc ribed below (incide nt-l ight
lamp 6 V/1 0 W).
~
Co nnect the 25 W su pply Oine)
lamp to the powe r su pply.
~
Switch on the su pply (line) lamp.
~Align
the lig ht spot with the object
as desc ribed.
Coaxial illuminator
o
This ill uminator is for obse rving and photog raphing flat,
highly-reflecting objects such as wafers, integrated circ uits
and pol ishe d metal sections.
The coaxia l incident lig ht housing fits like an accessory tube
between the optics carrier and the binocular tube, or between
the optics ca rrier and the phototube (page 50).
• For the MZ7s and MZ9s, fit the objective
m
preferably to the spacer ring (10 446 300), , , .
page 32. Th is wil l comp letely ill uminate -
the largest field of view.
~ ~
• A quarter-wave plate is req uired when the microscope
carrie r AXis used in the vertical position.
~Using the clamping screw, secure the quarter-wave plate to
the objective mount.
~Using the knu rled ring, turn the quarte r-wave plate unti l the
required effect is obta in ed.
Please observe the notes on the use of the aperture in the
AX microsco pe carrier (p. 19).
Le ica M Stereomic roscopes - Illuminations
47