Table of Contents
Advertisement
6. Assembling the Microscope
The microscope components are logically as-
sembled in this order:
• Transmitted light illumination carrier
• DIC module and DIC objective prisms*
• Specimen stage
• Condenser with condenser head
• Eyepieces
• Objectives
• Transmitted light lamps
• Lamp housing mount (mirror housings)
• Incident light lamps
• Assembly of incident light turret disk*
• Polarizer and analyzer*
When using intermediate systems and optical
accessories, the sequence may vary.
In this case, read Chapter
"6.15 Optional Accessories" → p. 52.
* depending on scope of delivery
6.1 Assembly Tools
If possible, the microscope should be assem-
bled and set up with the assistance of Leica
sales or service personnel.
A small number of universal screwdrivers which
are included in the scope of delivery are re-
quired for assembly (Fig. 7).
Fig. 7
Assembly tools
1
Phillips screwdriver*
2
3mm Allen key
3
1.5mm centering key*
4
2mm centering key*
5
3mm hex key*
6
2.5mm hex key* (short type)
7
2.5mm hex key*
1
3
4
6. Assembly
2
5
6
2
7
25
Advertisement
Table of Contents
