Call Forwarding; Using Variable Call Forwarding - Octopus F270 IT Operating Instructions Manual

Call Forwarding

Step by Step
28
Call Forwarding

Using Variable Call Forwarding

You can immediately forward internal or external calls to different in-
ternal or external telephones (destinations). (External destinations re-
quire special configuration in the system).
n
Lift the handset.
Enter the code.
or or Enter the line type you wish to use:
1 = all calls, 2 = external calls only, 3 = internal calls only
o w
Enter the destination number (without the external code).
Deactivating call forwarding:
n
Lift the handset.
w
Enter the code.
Special features must be taken into consideration if your tele-
phone operates with Octopus F IP-Netpackage (system net-
working via PC network) (
When call forwarding is active, a special dial tone sounds
when you lift the handset.
If DID DTMF is active (contact the service personnel), you
can also forward calls to this destination.
Destinations: Fax = 870, DID = 871, Fax DID = 872.
page 45)!