Controlling Relays (Not For Octopus F270 It); Paging; Simple Paging Equipment - Octopus F270 IT Operating Instructions Manual

Using Other Functions
Step by Step
or
38
Controlling Relays
(not for Octopus F270 IT)
If this feature is configured (contact the service personnel), you can
turn up to four relays on and off to control different facilities (such as
a door opener).
Depending on how they are programmed, you can switch the relays
on and off or switch them on and have them switched off automati-
cally after a timeout.
Special features must be taken into consideration if your tele-
phone operates with Octopus F IP-Netpackage (system net-
working via PC network) (
n
Lift the handset.
Enter the code for "on" or "off".
w
... Enter the relay.

Paging

If paging equipment is connected to your system (contact the service
personnel), you can contact people via their pocket receivers.
The pocket receiver indicates to the person you are looking for that
someone is trying to get in touch. The person you page can then go
to the nearest telephone and call you.
The operating procedures differ according to the type of radio pag-
ing equipment connected (simple or enhanced paging equipment).

Simple Paging Equipment

Paging:
To be paged, you must have activated a call ringing group
( page 43), call forwarding (
technician) to the internal station number of your paging equipment.
A call request is then signaled automatically.
Answering the page from the nearest telephone:
n
Lift the handset.
Enter the code.
o
Enter your own station number.
page 47)!
page 28), or call redirection (service