Using Call Waiting; Accepting A Waiting Call (Camp-On) - Octopus F270 IT Operating Instructions Manual

Step by Step

Using Call Waiting

Callers can still reach you while you are engaged in another call. A
signal alerts you to the waiting call.
You can either ignore or accept the waiting call.
When you accept the waiting call, you can either end the first call or
place it on hold and resume the call later on.
You can also bar call waiting or the call waiting tone (

Accepting a Waiting Call (Camp-On)

Precondition: You are engaged in a phone call and hear a tone (every
six seconds).
Ending the first call and answering the waiting call:
t
Replace the handset. Your telephone rings.
n
Answer the second call. Lift the handset.
Placing the first call on hold and answering the second call
(not for all ISDN telephones)
Enter the code.
You are connected to the call waiting party immediately. The first par-
ty is placed on hold.
Ending the second call and resuming the first one:
Press the key.
Enter the code or wait two seconds.
or (depending on the configuration)
Press the key twice.
Making and Answering Calls
page 10).
9