Sending A Signal To The Network; External Call Forwarding With A Multiple Subscriber Number - Octopus F100 Operating Instructions Manual

Conducting calls – enhanced functions
Step by Step
> <
Service?
> <
* 51=Recall to Net-
work?
> <
Service?
> <
Trunk FWD on?
> <
1=immediate?
> <
2=on no answer?
68

Sending a signal to the network

To enable ISDN-type services/ features to be started via analog lines
(forexample, call waiting when a line is busy, three-way conference
calls, etc.), you must send a signal to the network before dialling the
service code and/or phone number.
This function can also be called by entering the code (
p
You have an external connection.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o
Enter the service code and/or the phone number.
External call forwarding with a multiple
subscriber number
If your communication system is connected to an ISDN multiple de-
vice line, then you can forward all incoming calls from the public net-
work through your multiple subscriber number (MSN) to an external
destination.
There are three types of forwarding:
• Calls are forwarded immediately (1=immediate call forwarding).
• Calls are forwarded after a certain time (2=unanswered calls).
• Calls are only forwarded when the line is busy (3=when busy).
Activating call forwarding to a "trunk"
c or d Press and hold down the Talk key or press the Speakerphone key.
Call the system menu.
Menu
[
Select the menu item and confirm.
[
Select the menu item and confirm.
o [
Enter and confirm your own multiple subscriber number.
either:
[
Select the menu item and confirm.
or:
[
Select the menu item and confirm.
page 118).