Automatic Connection Setup (Hotline); Reserve Trunk - Octopus F270 IT Operating Instructions Manual

Making Calls
Step by Step
16

Automatic Connection Setup (Hotline)

If this function is configured (contact the service personnel), the sys-
tem automatically sets up a connection to a preset internal or external
destination.
n
Lift the handset.
Depending on the setting, the connection is either set up immediate-
ly or only after a preset period of time (hotline after a timeout).

Reserve Trunk

If this feature is configured (contact the service personnel), you can
reserve a busy trunk for your own use.
When the trunk is free, you receive a call.
n
Lift the handset.
o
Enter the external code. The external trunk is busy; you hear a busy
signal tone. Wait about 5 seconds until the busy tone ends.
The trunk is reserved.
t
Replace the handset.
When the reserved trunk becomes free:
Your telephone rings.
n
Lift the handset. You hear the CO dial tone.
o
Enter the number of the external station.