To Select The Dvor Mode - Vertex Standard VXA-300 PILOT III Operating Manual

To Select the DVOR Mode

When entering the NAV band (108.000 - 117.975
MHz), the VXA-300 selects the DVOR mode auto-
matically. The "C
OURSE
at the upper left corner on the display, and the "
or " " indicator will appear below the "Course
Indicator" field on the display.
: The "C I
OURSE NDICATOR
when either your aircraft is too far away from the VOR
station or the frequency is not correctly set to that of
the VOR station. Conversely, the "Course Indicator"
will indicate " " when receiving a localizer chan-
nel. The VXA-300 cannot decode a localizer signal.
The " " or " " flag indicators tell you whether
the VOR navigation information is based on a course
leading to the VOR station or leading away from the
VOR station.
To change the flag from "
press the [ F ] key momentarily, then press the
[ 3 ( FROM )] or [ 2 ( TO )] key, respectively.
The small "C
I
OURSE NDICATOR
indicators may be toggled to the larger "Frequency"
portion of the display. To do this, press and hold in
the [ ( )] key for 2 seconds to toggle to the larger
display area. Press the [
again to return to the smaller displays.
VXA-300 P O
ILOT
VOR N
" field will appear
I
NDICATOR
" indicates "
" to " " or vice versa,
" and " / " flag
( )] key momentarily
M
PERATING ANUAL
AVIGATION
COURSE Indicator
"
"
"TO"-"FROM" Flag Indicator
( )
2 seconds