Programming The User Key Assignment - Vertex Standard VXA-300 PILOT III Operating Manual

P
ROGRAMMING THE
Default VXA-300 functions have been assigned to "Pri-
mary" (press) and "Third" (press and hold in) function of
the front panel's [ USER ] key at the factory. These may be
changed by the user, if you wish to utilize another function
on this key.
To program the function assigned to the [ USER ] key:
Press the [ F ] key, then press the VOLUME knob to
activate the Menu ("SET") mode.
Rotate the DIAL knob to select the Menu Item to be
configured #18 "KEY1" which is tied to the primary
function, or #19 "KEY2" which is tied to the third func-
tion.
VXA-300 P O
ILOT
USER K
M
PERATING ANUAL
A
EY SSIGNMENTS
Press the VOLUME knob momentarily, then rotate
the DIAL knob to select the function you wish to as-
sign to the [ USER ] key.
When you have made your selection, press the VOL-
UME knob to save the new setting, then press the PTT
switch to exit the Menu ("SET") mode.
The available selections include: no ANL PA EQ
ANL: Receiver Automatic Noise Limiter (on)
PA: Public Address Mode (see page 24)
PIT: Pitch Control (see page 22)
no: Disables the key
41