Pa Operation - Vertex Standard VXA-300 PILOT III Operating Manual

The VXA-300 also provides for adjustment of the "Hang-
Time" of the VOX system (the transmit-receive delay af-
ter the cessation of speech) via the Menu. The default de-
lay is 1.0 second. To set a different delay time:
Press the [ F ] key, then press the VOLUME knob to
activate the Menu ("SET") mode.
Rotate the DIAL selector knob
to select Menu Item 22
"VDLY."
Press the VOLUME knob to
enable adjustment of this Menu item.
Rotate the DIAL selector knob to select the delay time
among "05," "10," "15," and "20" (representing 0.5,
1.0, 1.5, and 2.0 sec).
When you have made your selection, press the VOL-
UME knob to save the new setting, and then press the
PTT switch to exit to normal operation.
24
A O
DVANCED PERATION

PA Operation

The PA mode allows the VXA-300 to be used as a Public
Address System when an optional MH-44
or other Headset/Microphone is connected.
Press and hold in the
[ USER ] key for 2 sec-
onds to activate the PA
mode.
Speak through the mi-
crophone while pressing
and hold in the PTT
switch on the microphone or headset/microphone.
The "Course Deviation Needle"
will defect in accordance with
the voice level. Rotate the
VOLUME knob to control the
audio output level.
To exit the PA mode, press and hold in the [ USER ]
key again.
The VXA-300 provides for customization of the voice
monitor feature via the Menu while using a Headset. To
select the monitor configuration:
Press the [ F ] key, then press the VOLUME knob to
activate the Menu ("SET") mode.
VXA-300 P
Microphone
O M
ILOT PERATING ANUAL