Operating In The Split Mode - Vertex Standard VXA-220 Operating Manual

Operating in the Split Mode

It is assumed that you have already set the desired
VOR station's frequencies (in the NAV band) per the
above instructions.
Press the [ F ] key fol-
lowed by the [ 7 ( SPL )]
key to turn on the
"Split" function. The
"SPL" icon will appear
on the display.
Press and hold in the
PTT switch to transmit on
the split transmit fre-
quency.
Release the PTT switch to
return to the receive mode.
To disable the "Split" function, press the [ F ] key fol-
lowed by the [ 7 ( SPL )] key again.
Note: A split frequency can be programmed into each
memory channel independently. Set a transmit frequency
before programming the memory channel, if desired. The
split function on/off setting can also be programmed into
a memory channel.
VXA-220 P VI O
RO
S
PLIT
F
M
PERATING ANUAL
O
PERATION
35