To Select The Vor Mode - Vertex Standard SPIRIT VXA-710 Operating Manual

To Select the VOR Mode

When entering the NAV band (108.000 - 117.975
MHz), the VXA-710 selects the VOR mode automati-
cally. The "Course Indicator" will appear on the dis-
play, and the "TO" or "FROM" indicator will appear
at the right of the "Course Indicator" on the display.
Note: The "C
I
either your aircraft is too far away from the VOR sta-
tion or if the frequency is not correctly set to that of
the VOR station. Conversely, the "Course Indicator"
will indicate "Loc" when a localizer signal is being
received.
The "TO" or "FROM" flag indicators indicate whether
the VOR navigation information is based on a course
leading to the VOR station or leading away from the
VOR station.
To change the flag from "TO" to "FROM" or vice versa,
press the key followed by the
respectively.
The (small) frequency indication may be toggled to
display using larger characters (but "C
" and "TO"/"FROM" flag are reduced in size), if
you assign the "XFER" feature to the
page 40 for details.
VXA-710 S O
VOR N
AVIGATION
" indicates "---°" when
key or key,
I -
key. See
M
( A )
B
IR AND
COURSE Indicator
"TO" - "FROM" Flag Indicator
(Assigned the "XFER" feature)