Vertex Standard VXA-300 PILOT III Operating Manual page 52

20 WXAF
Function: Selects the Alert functions when receiving the
Weather Alert Signal on the WX channel.
Available Values: BP/LED/B+L/oFF
Default Setting: oFF
BP: Sounds a loud beep when receiving the Weather
Alert Signal.
LED: Flashes the BUSY/TX indicator when receiving the
Weather Alert Signal.
B+L: Sounds a loud beep and flashes the BUSY/TX indi-
cator when receiving the Weather Alert Signal.
oFF: Disables the Alert function.
When the Weather Alert function is activated, the "
icon will appear on the display.
21 VOX
Function: Enables/disables VOX operation.
Available Values: on/oFF
Default Setting: oFF
22 VDLY
Function: Selects the VOX delay ("hang") time.
Available Values: 05/10/15/20 (x0.1 sec)
Default Setting: 10 (x0.1 sec)
50
M "S " M
ENU ET
23 VSNS
Function: Sets the VOX sensitivity.
Available Values: 1 ~ 8
Default Setting: 4
24 HPLV
Function: Sets the Headphone audio level.
Available Values: 0 ~ 7
Default Setting: 6
25 PAMO
Function: Enables/disables the External Speaker while uti-
lizing the PA function.
Available Values: oFF/PA/ALL
"
Default Setting: oFF
oFF: Disables the monitor function at all times.
PA: Feeds back your voice to the headset while you're
pressing the PTT switch.
ALL:Feeds back your voice to the headset while you're
pressing the PTT switch. When the PTT switch is
off, you may monitor the sound around the trans-
ceiver (the monitor will pick up the background
sound using the VXA-300's internal microphone).
VXA-300 P
ODE
O
ILOT PERATING
M
ANUAL