Subscribe to Our Youtube Channel
Related Manuals for UWE FS-60
Summary of Contents for UWE FS-60
-
Page 1: Table Of Contents
FS SERIES CONTENTS All STAINLESS STEEL ELECTRONIC FLOOR SCALE 1. INSTALLATION OPERATION MANUAL 2. SPECIFICATIONS 3. KEYBOARD LAYOUT AND DESCRIPTION PLEASE READ THIS MANUAL VERY CAREFULLY BEFORE 4. INITIAL SETUP ATTEMPTING TO OPERATE THE SCALE 5. INSTRUCTION FOR USE TROUBLE SHOOTING DAILY CARE AND MAINTENANCE APPENDIX Installation Diagram... -
Page 2: Installation
1. INSTALLATION outlet. If not, do not plug in the adaptor, contact your dealer immediately. 1.1 Check and make sure that the following accessories are included: b. Before first time use, plug the main This operation manual adaptor into the wall outlet and charge Indicator x 1 the scale for at least 8 hours. -
Page 3: Specifications
2. SPECIFICATIONS 3. KEYBOARD LAYOUT AND DESCRIPTION Model No. Capacity Division FS-60 60kg 0.01kg FS-150 150kg 0.02kg FS-300 300kg 0.05kgg Platform size 425 x 525 mm Power source Built-in rechargeable battery or power adaptor Max. Tare range Up to 100% of rated capacity Max. - Page 4 4. MR KEY 10. M+ INDICATOR Press this key to recall the accumulated weight An arrow will appear and point at this sign value in memory. when the memory contains data. 5. TARE KEY 11. WEIGHT UNIT INDICATOR Press this key to tare off the weight of a "kg"...
-
Page 5: Initial Setup
4. INITIAL SETUP d. Press TARE twice e. Scale display F.3 4.1 Placing the Scale f. Press and hold MODE until the kg or lb Place the scale on a hard and strong surface, sign appears. where free from interference, g. -
Page 6: Instruction For Use
5. INSTRUCTION FOR USE Scale display F.4 f. Press MODE to shift between 0._OFF and 4._OFF. 5.1 Before Weighing g. To enable the Auto Power Off function, Make sure that: press ZERO when 4._OFF appears. a. The upper platform cover is inserted firmly h. - Page 7 Press MODE to shift among kg à decimal à lb/oz. Refer to SPECIFICATIONS for maximum zero range. à kg weight units. Refer to 4.2.1 for internal setting procedures. 5.6 Tare off the Weight of a Container When a container is used, follow the below steps The weight unit used before power off would to tare off the weight of the container and be employed when the scale is turned on again.
- Page 8 5.8 Bulky Weighting a. The scale is turned off, or, The pillar can be extended for bulky weighing. b. The weight unit is changed. Refer to Appendix Installation diagram for 5.10 Recharge the Scale pillar extension. scale equipped with built-in 5.9 Weight Memory Function rechargeable battery.
-
Page 9: Trouble Shooting
6. TROUBLE SHOOTING Syndrome Rated capacity cannot be reached Check Is the TARE indicator on? Syndrome Scale cannot be turned on Action: Turn the scale off. Remove all loads Check: Is the scale charged? from platform and turn on again. Action: Recharge the scale for at least 8 Check... -
Page 10: Daily Care And Maintenance
7. DAILY CARE AND MAINTENANCE Action Contact your dealer. Check Is the correct weight unit employed? Action Refer to 4.2.1 and 5.3 for weight Clean the scale with a soft and damp cloth. unit setting and usage. If necessary, apply a mild detergent. Do not use any high-pressure water spray, harsh, abrasive material, acetone, volatile solvent, thinner or alcohol... -
Page 11: Appendix
APPENDIX Installation Diagram...
Need help?
Do you have a question about the FS-60 and is the answer not in the manual?
Questions and answers