Table of Contents
Advertisement
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
3
20
www.mymowerparts.com
Check that the spacer is undamaged and that the pulse
channel is not blocked.
Fit the filter holder and carburettor bolts (with insulating
sleeves) to the carburettor. Fit the gaskets and spacer.
Insert the spacer through the baffle.
NOTE! Make sure the gasket between the cylinder and
spacer is correctly positioned.
Screw the carburettor bolts in alternately. Do not tighten.
Tighten the bolts for the air filter holder. Then tighten the
carburettor bolts.
Connect the fuel hose and throttle cable.
Fit the choke/start control and check its operation. Fit the
air filter and air filter cover.
Hide quick links:
Advertisement
Table of Contents
