Starter Unit - Husqvarna 250 PS Workshop Manual

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
12

2. Starter unit

!
www.mymowerparts.com
WARNING! If handled carelessly the return spring
may spring out and cause injury. Always take care
when you replace the starter cord or spring.
Wear safety goggles!
Removal
Undo the four fuel tank clamps and move the fuel tank
out of the way. Undo the cylinder cover.
Unscrew the bolts that hold the starter unit against the
crankcase and lift off the starter unit.
Release the spring by lifting up the cord and letting the
pulley rotate clockwise. Undo the bolt at the centre of the
pulley and the screws that hold the spring cassette.
Carefully lift out the pulley and spring cassette. Clean
them. Replace the cord and/or spring (with cassette) if
necessary. Lubricate the return spring with light oil.
Assembly
Replace the spring cassette in the starter casing.