Husqvarna 250 PS Workshop Manual page 43

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
9
Undo the chain drive cog by holding the cog with a
polygrip and inserting tool no. 502 52 13-01 (4 mm Allen
key) into the shaft of the hydraulic motor. Turn the Allen
key clockwise.
Remove the 4 bolts that hold the motor and the 4 bolts
that hold the bar plate to the ball joint mounting.
Disconnect the hoses from the motor (return hose =
jubilee clip, pressure hose = hose coupling).
Slide off the rubber sheath that holds the two hoses
together.
If necessary, dismantle the ball joint by first removing the
jubilee clip, then prising off the ball joint mounting.
43
www.mymowerparts.com