Husqvarna 250 PS Workshop Manual page 40

For Husqvarna Parts Call 606-678-9623 or 606-561-4983
9
40
Diffuser
www.mymowerparts.com
Assembly
Fit the rubber sleeve in the opening.
Hold the knurled side of the support ring against the
rubber sleeve on the inside of the tank and bolt the tank
adapter in place. Make sure the locating studs on the
adapter are correctly positioned.
Lower the hydraulic pump into the tank (the hydraulic
hose must be attached).
Push the pump out through the opening against the tank
adapter and tighten the four bolts.
Fit the diffuser (17 socket).
Feed the hydraulic hose out through the upper hole in
the tank wall. Fit the quick couplings.