Assisted Gps (Agps); Nmea Output - Benefon TRACK ONE Owner's Manual

last calculated position. To make
sure, the position represents your
current whereabouts, refresh the po-
sition before sending by selecting Po-
sition refresh in the quick menu.

ASSISTED GPS (AGPS)

In this menu you can specify settings for or-
dering assisted GPS information from a ser-
vice provider. The
ephemeris information from a given num-
ber of satellites. It is used for speeding up
the initial position fix. The AGPS informa-
tion may also help in finding satellites and
getting position in difficult conditions.
-
Press to enter the
SELECT
menu Select an option with
.
• SMS number : Press
the SMS number of the AGPS service. By
-
pressing
SEARCH
the number from your phone book.
-
When ready, press
• Number of satellites
148 MAIN MENU: GPS
AGPS contains
Assisted GPS
n
.
-
and key in
CHANGE
you can also recall
SAVE.
-
: Press and
CHANGE
n
select with the number of satellites.
However, please note that the more satel-
lites selected, the better the accuracy but
the higher the charge. When ready, press
-
OK.

NMEA OUTPUT

In this menu you can turn the NMEA output
on or off. This phone supports the NMEA
protocol, which is used for transferring po-
sition data between the phone and some
navigation systems, e.g. a map software. For
the connection you also need a separate
NMEA cable, which is sold as an accessory.
-
Press to enter the menu. High-
CHANGE
light the desired option with
-
OK.
By selecting Off, you will turn the
-
NMEA output port off.
- By selecting a transferring speed you
will turn the NMEA output on.
When the NMEA output is turned on, the
phone will consume slightly more power.
n
and press