Jumpers And Connectors - Advantech AIMB-584 User Manual


Power consumption:
LAG1150 Core i7 4770S 3.1 GHz, 8MB L3 Cache, 4pcs 8GB DDR3 1600MHz
memory
+5 V
2.22 A
Measure the maximum current value which system under maximum load (CPU:
Top speed, RAM & Graphic: Full loading)

Board size: 240 mm x 240 mm (9.6" x 9.6")

Board weight: 0.365 kg
1.4

Jumpers and Connectors

Connectors on the AIMB-584 motherboard link it to devices such as hard disk drives
and a keyboard. In addition, the board has a number of jumpers used to configure
your system for your application.
The tables below list the function of each of the board jumpers and connectors. Later
sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc-
tions for connecting external devices to your motherboard.
Table 1.1: Jumpers
Label
JFP1 (Keyboard
Lock and
Power LED)
JFP2
JSETCOM3
JCMOS1
JCASE1
JLVDS1
JIR1+JOBS1 +JWDT1
JME1
JTAG
Table 1.2: Connectors
Label
COM1
COM2
COM3/4/5/6
DP1
VGA1+DVI1
LAN1_USB12
LAN2_USB34
LANLED1
USB5-12
AIMB-584 User Manual
3.3 V 12 V
1.13 A 5.18 A
Function
Power LED
Suspend: Fast flash (ATX/ AT)
System Off: Slow flash (ATX)
System Off: OFF (AT)
System On: ON (ATX/ AT)
Power Switch/ Reset/ External Speaker/ SATA HDD LED
/ SMBus connector
Serial port:RS232/RS422/RS485 jumper setting
CMOS clear (default 1-2 pin)
case open connector
LVDS power jumper
Jumper for Irda/Watchdog/OBS
Jumper for flash descriptor security Override
Joint Test Action Group connector 2x5 P
Function
Serial Port 1 (RS-232)
Serial Port COM2, pin header 2 x 5
Serial port: COM 3/4/5/6, box header 2x 20 p, COM3 sup-
ports RS232/422/485
Display Port Connector
VGA Connector (Top) and DVI connector (bottom)
LAN1 & USB12 Connector
LAN2 & USB34 Connector
Front Panel LAN Indicator connector
USB port 5-6, 7-8, 9-10, 11-12 (internal 2 x 5 pin header
on board)
5 Vsb -12 V
0.49 A 0 A
4